Products

MAGICBEE

Feature

Wireless Monitoring System

General-purpose monitoring device equipped with ZigBee wireless capability.

Making wireless more usable.
Achieving wire saving by battery driving.

Specification

General specification

Item Master station Slave station
CC-Link type USB type End device Router
Model MGB10-GC-T MGB1X-BCCURN-T MGB10-ERN-T MGB10-RRN-T
Ambient operating temperature 0~+55℃ -10~+70℃ -10~+70℃ *1
Ambient operating humidity 25~85%RH(No condensation allowed)
Installation location Indoors(No exposure to direct sunlight, rain water drops and no condensation/corrosive gas allowed)
RoHS Directive Compliant
Outer dimensions W160×D90×H42
(excluding any protruding object such as an antenna)
W60×D120×H29
(excluding any protruding object such as an antenna)
Weight 560g 75g 120g 100g

Power supply specification

Item Master station Slave station
CC-Link type USB Type End device Router
Model MGB10-GC-T MGB1X-BCCURN-T MGB10-ERN-T MGB10-RRN-T
Power voltage DC24V DC5V
(USB bus power)
battery: DC3V *2
(equivalent to CR17335A)
Additional battery: DC3V
connected to external connection terminal
External power supply:
DC5V(AC adapter)
Power consumption 5W MAX 0.5W MAX (End device) *3
Operating: 150 mW
Standby: 15 μW or less at 25℃
Temperature, humidity, illuminance measurement/Measurement interval:
10 minutes/
Approx. 5 years at battery capacity of 1650mAh *4
(Router) *3
Operating:410 mW at 25℃

Wireless specification

Item Master station Slave station
CC-Link type USB type End device Router
Model MGB10-GC-T MGB1X-BCCURN-T MGB10-ERN-T MGB10-RRN-T
Radio type ISM band 2.4GHz
Compliant standard IEEE802.15.4
Radio wave type DSSS(Direct Sequence Spread Spectrum)
Modulation scheme O-QPSK(Offset-Quaternary Phase Shift Keying)
Frequency used 2.405GHz~2.475GHz
Number of frequency channels 15 channels
Transmission speed 250kbps MAX
Transmission distance Indoor: 60 m(Line of sight)
Outdoor: 1,200 m(Line of sight)
The transmission distance is a specification of the wireless module and varies greatly depending on the antenna installation position, height and obstacles.
RF output 10.23mW MAX

Interfaces

Item name Specifications
Master station CC-Link type CC-Link Ver.2.00/1.1-compatible remote device station
USB USB 2.0 Full Speed compatible.
Slave station Common to end device/router Analog input 2 point Voltage : DC0-5V/DC1-5V
Current : DC0-20mA/DC4-20mA
Accuracy : ±1.0% FS
Digital input 2 point Non-voltage contact “a” or open collector
Pluse input 1 point 1kHz max (600Hz) *5
Cannot be used in sleep mode
Temperature sensor
(Built-in)
1 point Measurement range : -10 ~ 70℃
Humidity sensor
(Built-in)
1 point Measurement range : 25 ~ 85%RH
Illuminance sensor
(Built-in)
1 point Measurement range : 10 ~ 100,000lx
Router Digital output 1 point Photocoupler-isolated open-collector output

*1 : 0 to +40℃ when using an AC adapter
*2 : The battery is not a rechargeable type.
*3 : These values are for battery drive for end devices and AC adapter drive for routers.
*4 : The data shown is only a guide.
    Battery life varies greatly depending on the usage environment and situation.
*5 : Must be 600 Hz or less for use over two consecutive days.

 

Registered model to NBTC by Supplier Document of Conformity
Master station USB Type    MGB1X-BCCURN-T
Slave station    End device MGB10-ERN-T
          Router      MGB10-RRN-T

Principal Use

Applications

  • Environmental monitoring of buildings and facilities
    (e.g., temperature, humidity, illuminance)
  • Environmental monitoring of farmland
    (e.g., temperature, humidity, sunshine amount, soil temperature)
  • Safety and quality traceability in transportation process
    (e.g., temperature, humidity, acceleration)
  • Environmental monitoring
    (e.g., radiation, temperature)
  • Monitoring of equipment status
    (e.g., digital input/output, pulse input, analog input)

 

Download

MAGIC BEE Catalog

PDF Data Download

Please inquire about custom products.